There are several ways to keep your oven in its best working condition. This is important to promote prolonged durability and performance. If you are unsure what processes need to be done, read the article to find out some useful oven maintenance tips that you can follow on your own.
Maintain the Oven Blower
The blower motor of your oven is its most important feature. You need to apply proper lubrication for models with a sleeve-bearing motor. If your oven has a ball-bearing motor, pre-lubrication has already been done at the factory. To lubricate, apply a suitable oil at the back and front of the motor where there may be hidden ports inside the housing. This process can help to prevent premature damage as dirt and debris inside the blower motor will not continue to build up.
Consider Placement of Oven
Another important factor to consider is where you place your oven. Always ensure there is sufficient airflow around its blower motor to prevent any blockage. When putting things inside the oven, make sure that the oven’s inlets and outlets are not restricted. This can prevent early element failure or encourage poor performance.
Using Correct Power for Oven
Operating your oven on reduced power may result in poor performance. To avoid this problem, you need to correct the supply with a buck-boost transformer.
Check Oven Heating Elements
Heating elements that have burnt out can result in reduced power and performance. If you sense a drop of oven power or performance, check the heating elements. You can start by checking the resistance of each heating element by using a digital multimeter. Before doing this, always ensure to switch off the power. This issue will require more time for your food to cook, hence using much more electricity. A second method is to use an ammeter to check for amperage. If the current is 10 percent lower, check individual heating elements.
Check Oven Thermocouples
If your oven had shut off due to a sensor break, there may be an issue with its wiring. Check for any broken or open thermocouple. It may also potentially be a shorted lead that occurs less frequently outside of the oven.
Plug any Unnecessary Heat Loss
If your oven has a light, use a port plug inside its socket when not in use. The light socket may have a temperature rating which is lower than your oven rating. By using a port plug, you can reduce heat loss and prevent socket malfunction.
Check Oven Door Gaskets
Check the gaskets found on the oven door periodically to spot any damage or missing sections. If there is heat escaping from the oven, it is likely due to a torn gasket.
Inspect Slide and Mounting Assemblies
Some ovens may need special mounting if they are designed for material testing. Inspect the slide and mounting assemblies regularly to ensure that all lock mechanisms are functioning well.
Cool Oven Correctly
Some ovens need to be cooled down to a low temperature after using. When using water-based cooling accessories, avoid an excessive flow. This may damage the oven as cooling is not done gradually.